Request A Free Quote
Follow Us
Request A Quote

Concrete Cutting for Plumbing in Greenville NC for Slab Leaks, Dust in the House, and Patches That Sink Under Tile

We cut the slab, dig to the pipe, and patch it flat after inspection, with the dust contained and your flooring put back. Zavala Masonry and Concrete Contractor LLC handles concrete cutting for plumbing Greenville NC homeowners and plumbers need: slab leak openings, drain and sewer trenches, bathroom and kitchen moves, core holes, and outdoor cuts. We scan before we cut, saw straight lines, run water fed saws and HEPA vacuums indoors, and leave your plumber a ready opening. After inspection, we backfill, dowel, pour back, and reinstall your flooring across Pitt County NC.

  • Scanned Before We Cut
  • Dust Contained Indoors
  • Patched Flat After Inspection
  • Flooring Put Back
Get a Free Estimate

Slab Leaks, Drain Lines, Bathroom
Moves, and Outdoor Cuts We Open for Plumbers

For slab cutting Greenville NC plumbers schedule with us, we open concrete for:

A construction worker in an orange vest cutting stone blocks with an angle grinder, concrete

Slab Leak Access

Our slab leak access starts with a box opening over the leak your plumber located. Under slab plumbing access stays as small as the repair allows.
learn more
A close up of a machine cutting a piece of wood, concrete cutting in Greenville NC

Cast Iron Drains and Sewer Lines Under the Slab

Cast iron drain replacement under slab needs a trench along the old line. We open a sewer line under slab the same way for your plumber.
learn more
Workers operating a cement mixer at a construction site, concrete cutting in Greenville NC

Moving a Toilet, Shower, or Tub Drain

Bathroom remodel slab cutting runs a trench from the new fixture to the existing line. Moving a toilet drain needs a flat patch for tile.
learn more
Grey and teal Makita miter saw on table outdoors during daytime, concrete cutting in Greenville NC

Kitchen Islands, Laundry, and Garage Bathrooms

Cutting concrete floor for plumbing opens new drain and water runs for islands, laundry moves, and garage bathrooms.
learn more
A close up of a circular saw blade, concrete cutting in Greenville NC

Core Drilling for Pipes

Core drilling for pipes cuts round holes through slabs and walls where lines pass through.
learn more
Industrial construction site with multiple cranes under a cloudy sky, concrete cutting

Driveway, Patio, and Garage Cuts

Driveway cutting for sewer line work opens a clean strip to the main. Garage slab cutting reaches lines under converted garages and additions.
block foundations
A construction site with a crane in the background, concrete cutting in Greenville NC

Commercial Floor Drains and Grease Lines

Commercial floor drain cutting serves restaurants and small businesses adding drains or grease lines.
learn more

New slabs are on concrete slabs, full replacements on driveways and patios.

Concrete Saw Cutting Greenville NC Homes Can Live Through Without Dust Everywhere

A couple of men standing next to a construction site, concrete cutting in Greenville NC
Get a quote now

Our concrete cutting Greenville NC crew protects the room first and keeps dust and slurry contained:

  • Scan first

GPR scanning locates conduit and lines to reduce the risk of hitting them, though no scan finds everything.

  • Protect the room

Plastic walls, floor protection, and furniture moved or covered, with flooring removed over the cut.

  • Clean openings

Straight diamond blade saw cuts go full depth, so the slab around the opening does not crack from hammering alone.

  • Break out and haul off

Concrete breaking and removal stays inside the cut lines, and debris goes out, not through the house.

  • Dust control

Wet cutting with water fed to the blade and HEPA vacuums, with slurry cleaned up as we go and no dry sweeping.

We follow the OSHA silica rule, 29 CFR 1926.1153 and Concrete Sawing and Drilling Association practices.

Who Cuts, Who Fixes the
Pipe, and Who Patches the Floor

When a slab has to be opened for plumbing, we handle the concrete from scan to patch, your licensed plumber handles the pipes, and the inspector checks the plumbing before anything is covered.

Steps for repairing a plumbing pipe under a slab, and who handles each step: our crew, your licensed plumber, or the city or county inspector
Step Who
Scan, protect the room, and remove flooring Our crew
Saw cut, break out, and dig to the pipe Our crew
Repair, replace, or reroute the pipe and pressure test Your licensed plumber
Plumbing inspection City of Greenville NC or Pitt County inspector
Backfill, vapor barrier, dowels, and pour back Our crew
Reinstall flooring Our crew

With slab cutting for plumbing split this way, nobody waits on the wrong trade. See the City of Greenville NC Inspections page.

How We Patch the Slab After the Plumber So Tile Does Not Crack

A slab patch stays flat when the trench is backfilled in compacted layers, the vapor barrier is patched, dowels tie the new concrete to the old slab, and the pour is finished flush with the floor.

  • After inspection

Nothing is covered until the plumbing passes.

  • Compacted backfill

Soil goes back in layers, with stone or clean fill around the pipes as your plumber requires, so the patch cannot sink.

  • Vapor barrier

Patched and lapped under the old slab edges to keep ground moisture out of your flooring.

  • Dowels

Rebar pins drilled into the old slab edges so the patch cannot drop or rock.

  • Flush pour

Our trench pour back is finished smooth for tile, vinyl, or carpet, or broom finished outdoors.

  • Cure, then flooring

We reinstall your flooring after the cure time we give you for your patch.

Every concrete patch after plumbing follows these steps, so the floor acts like one piece.

Get a quote now

Box Openings, Trenches, and
Core Holes: What Your Job Needs

Plumbing jobs and the opening we cut for each: a box opening over a leak, a narrow trench along a drain line, a trench from a new fixture to the existing line, and a core drilled hole for a pipe through a slab or wall
Job Opening We Cut
A leak at one spot A box opening over the leak
Replacing or rerouting a drain line A narrow trench along the pipe run
Moving a toilet or shower drain A trench from the new fixture to the existing line
A pipe through a slab or wall A core drilled hole

Our concrete trenching Greenville NC work is laid out from your plumber’s marks. Slab trenching for plumbing stays as narrow as the plumber needs.

Seven construction workers standing on white field, concrete cutting in Greenville NC

Older Ranch Slabs, Cast Iron Drains, and Water in the Hole

Many 1960s and 1970s ranch homes, converted garages, and additions in Greenville NC have thin older slabs over cast iron drains, so we scan and cut carefully to keep the floor around the opening from cracking. A seasonal high water table and clay can fill a hole, so we pump it out and keep the soil stable. Outdoors, about 49 inches of rain a year means every patch must drain and match.

Gray concrete building under construction, concrete cutting in Greenville NC

Cutting Driveways, Patios, and Garage Slabs for Sewer and Water Lines

We call NC 811 before digging and saw cut openings in driveways, patios, sidewalks, and garage slabs. Each driveway cutting for sewer line job gets compacted backfill, dowels into the old concrete, and a broom finish matched to the surface. Garage slab cutting gets the same patch method indoors. We confirm the rules before cutting any public sidewalk or street.

Construction workers pouring concrete on a sunny day, concrete cutting in Greenville NC

A Cutting and Patch Crew Plumbers Can Schedule

  • We cut to your layout and your schedule.
  • Slab leaks get same week scheduling.
  • The opening is dug to the pipe and ready when you arrive.
  • We come back after inspection to backfill, patch, and reinstall flooring, so you stay on the pipes.
Get a Free Estimate

Why Greenville NC Homeowners and Plumbers Hire Us to Open Slabs

  • Zavala Masonry and Concrete Contractor LLC handles everything but the pipes.
  • Straight saw cuts, water fed blades, and HEPA vacuums indoors.
  • Nothing covered until the plumbing passes inspection.
  • Patches doweled and poured flush, ready for tile or vinyl.
Get a Free Estimate
Construction workers in hard hats near a building, concrete cutting in Greenville NC
Aerial view of construction workers in orange high-visibility clothing on a concrete building

Your Slab Cutting Job, From First Call to Flooring Back Down

  1. You call or send photos, plus the plumber’s layout if you have it.
  2. We visit to confirm the route, flooring, and access, then give you an estimate.
  3. We protect the room, scan, saw cut, break out, and dig to the pipe.
  4. Your plumber repairs the line, and the inspector checks it.
  5. We backfill, patch the vapor barrier, set dowels, and pour flush.
  6. We let the patch cure and reinstall your flooring.
Get a Free Estimate

What Shapes Your Slab Cutting Quote

  • Length and number of openings
  • Slab thickness
  • Indoor or outdoor
  • Digging depth
  • Flooring removal and reinstall
  • Core holes
  • Outdoor finish matching
  • Equipment access

Your concrete cutting estimate comes in writing after we see the layout.

Get a Free Estimate
Construction workers building a large foundation, concrete cutting in Greenville NC

Recent Slab Openings and Patches Around Greenville NC

Room sealed with plastic before a slab cut

Greenville NC

Dowels set before the pour back

Greenville NC

Saw cut trench for a cast iron drain

Winterville NC

Core hole for a pipe through a slab

Ayden NC

Driveway patch over a new sewer line

Washington NC

Backfill and vapor barrier in a trench

Farmville NC

Reviews From Homeowners and
Plumbers Who Hired Us for Slab Cutting

"Our plumber found a leak under the kitchen. They sealed the room in plastic, cut a neat box, and the patch is flat under our new vinyl."
Stephen Rhodes, Greenville NC
"We moved a toilet during our bathroom remodel. The trench patch is level, and the tile has not cracked."
Michelle Barrett, Winterville NC
"I run a plumbing crew. They had the trench dug to the pipe when we showed up and came back after inspection to pour it back."
Travis Edwards, Greenville NC
"Our 1970s ranch had a cracked cast iron drain. They scanned, cut straight lines, and kept dust out of the rest of the house."
Linda Patterson, Ayden NC
"They cut our driveway for a new sewer line and patched it with a broom finish that matches the old concrete."
Gary Whitfield, Farmville NC
"Tenants were home in our duplex near ECU. The crew kept the mess inside the plastic and finished the patch quickly."
Donna Keel, Greenville NC

Slab Cutting and Patching Across Pitt, Beaufort, and Craven County Towns

Our crew handles concrete cutting for plumbing jobs in:

  • Belhaven, NC
  • Chocowinity, NC
  • Washington, NC
  • Bath, NC
  • Blounts Creek, NC
  • Aurora, NC
  • Vanceboro, NC
  • Grimesland, NC
  • Greenville, NC
  • Winterville, NC
  • Farmville, NC
  • New Bern, NC
  • Ayden, NC

Plus surrounding communities in Beaufort County and Pitt County.

Get a Qoute now

Floor Level, Flooring, Dust, and
Scheduling Questions Before We Open Your Slab

Yes. We dowel the patch to the old slab and pour it flush and smooth for flooring.

After the cure time we give you for your patch. We reinstall the flooring for you.

Very little. We cut wet, run HEPA vacuums, and seal the room with plastic walls.

We offer same week scheduling for slab leaks and work around your plumber’s schedule.

Schedule Concrete Cutting for Plumbing Greenville NC
Homeowners and Plumbers Can Count On

Call us or send photos and your plumber’s layout. Zavala Masonry and Concrete Contractor LLC will confirm the route, protect your home, and give you a written estimate for the cut and patch.

Get a Free Estimate