Request A Free Quote
Follow Us
Request A Quote

Stone Veneer Installation in Greenville NC for Dated Brick, Bare Block, and Stained Chimneys

Natural or manufactured stone for facades, foundations, and chimneys, set over a wall built to drain. Zavala Masonry & Concrete LLC handles stone veneer installation (Greenville NC) for facades, foundation skirting, chimney refacing, additions, and flagstone across Pitt County. We set natural or manufactured stone in mortar over a barrier, weep screed, and flashing installed to code and manufacturer guidance.

  • Stone Samples On Site
  • Natural and Manufactured Stone
  • Masonry Crew, Not a Siding Crew
Get a Free Estimate

What Stone Veneer Is, How It Attaches, and How Long the Job Takes

Stone veneer installation adds a layer of natural or manufactured stone to an exterior wall, chimney, or foundation, set in mortar over a water resistive barrier and drainage detail that keeps the wall behind it dry. The veneer covers the wall; it does not hold it up.

Adhered veneer is lighter stone bonded to a scratch coat or prepared masonry; anchored veneer is heavier, full thickness stone tied back to the wall. Most homes use adhered veneer. Most stone jobs take a few days to about two weeks, depending on area and prep, and a local stone mason sets every piece.

Get a Free Estimate
A close up of a wall made of stone blocks, stone veneer in Greenville NC

Facades, Foundation Skirting,
Chimneys, Additions, and Flagstone We Cover in Stone

A stone wall covered in snow next to a fence

Exterior Facades and Wainscot

A stone facade can cover a full front, an accent wall, or lower wall wainscot. We install it on brick ranches, painted block homes, and in place of worn siding as stone siding.
learn more
A wooden door sitting next to a brick building

Foundation and Crawl Space Skirting

Foundation stone veneer covers exposed block or poured concrete at the base of the house. We finish the stone skirting at the right height above grade so the base can drain.
learn more
White brick surface

Chimney Refacing

Chimney stone veneer gives a worn or dated chimney a new face without a rebuild. We use natural or manufactured stone and check the flashing at the roof line.
learn more
Aerial view of gray concrete building, block foundation in Washington NC

Additions, Garages, and Porch Columns

Additions and garages get stone matched to the original house. We also wrap porch posts in stone to match the front.
learn more
Aerial view of gray concrete building, block foundation in Washington NC

Flagstone Patios and Walkways

A flagstone patio or walkway uses natural stone set for level footing and good drainage. Concrete pavers are on our paver page.
learn more
Black rectangular plastic on white concrete

Stone on Outdoor Kitchens and Fireplaces

We face outdoor features in natural or manufactured stone. Build details live on our outdoor kitchens and outdoor fireplaces and fire pits pages.
learn more

See also mailboxes and columns, steps and stoops, and retaining walls.

Brown and gray brick wall, stone masonry in Greenville NC

Good Reasons to Add Stone, and Problems to Fix Before Any Stone Goes On

Good reasons for stone:

  • A dated or plain exterior
  • A bare block foundation
  • A worn chimney face
  • An addition that does not match the house

Fix these first:

  • Active leaks or soft sheathing
  • Efflorescence or mildew from water in the wall
  • Loose, crumbling, or painted surfaces
  • Missing gutters dumping water on the wall

Stone set over a wet or failing wall hides the problem without solving it.

The Barrier, Weep Screed, Flashing,
Lath, and Scratch Coat Behind Every Stone We Set

A missing layer lets water get behind the stone and into the wall.

Layers behind stone veneer, what each does, and the rule followed for each
LayerWhat it doesThe rule we follow
Water resistive barrierSheds water that gets behind the stoneTwo layers on wood frame walls with lath (CMHA and MVMA)
Weep screed at the baseLets trapped water drain out3½ inch flange; stone stops 4 inches above earth, 2 inches above paving, ½ inch above walking surfaces (IRC R703.12)
Flashing and kick outsSteer water away at openingsEvery window, door, and transition; kick out flashing where a roof meets the wall
LathHolds the scratch coatSelf furred, corrosion resistant, lapped at seams
Scratch coatThe base the stone bonds toAbout ½ to ¾ inch thick, then scored
Stone and mortarThe finish you seeFull mortar on the back of every stone

Most stone veneer failures trace back to one missing layer, not to the stone. The checkpoints come from NCMA TEK 20-01, hosted by the NC Office of State Fire Marshal.

Can Stone Veneer Go Over Existing Brick, Block, or Concrete?

Often, yes. Codes do not require a barrier or weep screed over masonry walls, so clean, sound, unpainted brick or block can take stone directly with bonding prep. Stone veneer over brick is common on older ranch homes.

Painted, sealed, glossy, or dusty brick, or a barrier added over masonry, requires lath and a scratch coat or cement board. Cracked or wet masonry is repaired first, and we check trim so the added stone depth fits.

Get A Free Estimate
Gray and black stone wall, stone veneer installation, Greenville NC

Natural Stone, Manufactured Stone, or
Stone Look Panels: Weight, Water, and Look Compared

Comparison of natural stone, manufactured stone, and stone look panels by look, weight, water absorption, and best use
OptionLookWeightWaterGood for
Thin natural stone (about 1½ inches)Every piece uniqueAdhered rangeLow absorptionFacades, chimneys, accents
Full bed natural stone (about 4 inches)Deepest lookHeavy; needs anchored designLow absorptionWalls designed for it
Manufactured or cultured stoneConsistent color and sizeLighterAbsorbs up to about 22 percentFacades and skirting on a budget
Stone look panelsUniform, faster installLightestDepends on productQuick cosmetic jobs, not mortar set masonry

Adhered veneer must stay within 15 pounds per square foot and 2⅝ inches thick; heavier stone must be anchored. We help you choose natural stone veneer from samples on your own wall. Every manufactured stone veneer installation follows the same layer rules, and so does cultured stone installation on skirting or additions.

Warning Signs That an Existing Stone Veneer Job Was Done Wrong

  • Stones loosening or falling:

poor bond or water behind the stone

  • Stains or soft drywall below windows:

missing window flashing

  • Streaks at roof and wall corners:

missing kick out flashing

  • Stone touching soil, mulch, or pavers:

no clearance and a buried weep screed

  • White staining that keeps returning:

water moving through the wall

These usually need the stone opened and layers corrected; see masonry repair.

Get a quote now
Gray and white brick wall, stone masonry in Greenville NC

How Greenville NC Rain, Humidity, and Storms Shape Our Stone Veneer Details

Greenville NC gets about 49 inches of rain a year, humid summers, and wind driven rain during hurricane season, June through November. Rain splashes up at the base, which is why the 4 inch and 2 inch clearances matter and why later mulch must never bury the weep screed. We schedule summer mortar work for cooler hours and protect it while it cures. Brick ranches from the 1960s to 1980s near ECU are common candidates for stone.

Get a Free Estimate

Why Homeowners Hire Our Masons for Stone Work

  • Zavala Masonry & Concrete LLC lists every layer behind the stone in your written estimate.
  • Stone is set in mortar by a masonry crew, not stuck on by a siding crew.
  • You see samples on your wall first.
  • We check base clearances so mulch and pavers never bury the weep screed.
Get A Free Estimate
Brown and gray brick wall surface, stone masonry in Greenville NC
Brown wall bricks, stone masonry in Greenville NC

Our Stone Veneer Installation Process, From Wall Check to Final Walkthrough

  • We check wall type, condition, moisture, and base clearances.
  • You choose natural, manufactured, or matching stone from samples.
  • You get a written estimate listing each layer.
  • We prep the wall with every layer, or direct bond prep on sound masonry.
  • We set stone from the bottom up with full mortar coverage and fitted corners.
  • We finish joints, clean the site, and check clearances at the final walkthrough.

We confirm any permit needs for your project before work starts.

Get a Free Estimate

Stone Veneer Cost: What Changes the Price

  • Square footage
  • Natural, manufactured, or full bed stone
  • Wall prep (frame vs masonry, painted brick)
  • Corners, openings, and trim
  • Height and access
  • Removal of old siding or failed veneer

You get an itemized written quote.

Get A Free Estimate
Gray and brown rocky mountain, stone masonry in Greenville NC

Recent Stone Facades, Skirting, and Chimney
Projects Around Greenville NC

Weep screed and barrier before stone

Greenville, NC

Lath and scratch coat ready for stone

Winterville, NC

Stone facade on a brick ranch

Greenville NC

Foundation stone skirting

Ayden NC

Chimney stone refacing

Washington NC

Flagstone walkway

Farmville NC

Reviews From Homeowners
Who Added Stone to Their Homes

"Our 1970s brick ranch looked tired. The stone front changed that, and they showed us every layer before the stone went on."
Patricia Coleman, Greenville NC
"The block foundation always looked unfinished. The stone skirting sits right above the grade line, and it finally looks complete."
Richard Hughes, Winterville NC
"Our chimney was stained and worn. They refaced it in stone and fixed the flashing at the roof while they were up there."
Laura Simmons, Washington NC
"They matched the stone on our new garage to the house so closely that nobody can tell which part is newer."
Kevin Porter, Ayden NC
"Another company wanted to stick stone over our painted brick. These masons explained why it needed lath and a scratch coat first."
Susan Bradley, Chocowinity NC
"Our flagstone walkway is level and drains well, even after heavy rain."
Thomas Grant, Farmville NC

Stone Veneer Service Across Pitt, Beaufort, and Craven County Towns

Our crew installs stone veneer in these towns:

  • Belhaven, NC
  • Chocowinity, NC
  • Washington, NC
  • Bath, NC
  • Blounts Creek, NC
  • Aurora, NC
  • Vanceboro, NC
  • Grimesland, NC
  • Greenville, NC
  • Winterville, NC
  • Farmville, NC
  • New Bern, NC
  • Ayden, NC

Plus surrounding communities in Beaufort County and Pitt County.

Get a Quote Now

Rot, Timeline, Stone Matching, and Care
Questions About Stone Veneer

Not when the barrier, weep screed, and flashing are installed correctly. Rot comes from water trapped behind the stone, not from the stone itself.

Most jobs take a few days to about two weeks, depending on area, prep, and weather.

Yes. We bring samples to find the closest available match in color, size, and pattern.

Rinse it with water now and then, keep gutters working, and keep mulch and pavers below the weep screed so the base can drain.

Stone Veneer Installation, Greenville NC: Get a Free Estimate

Call Zavala Masonry & Concrete LLC or request your free estimate.

Get a Free Estimate